TCS Bore Cleaning Paste for Shooters (10ml)

TCS Manufacturing Bore Cleaning Paste is a micrometer ground garnet in a gray paste. This paste is non-embedding, nearly odorless, and comes in an easy to use syringe. With TCS bore paste, you no longer need foul smelling solvents or expensive wire brushes. Just put a dab of this product on a patch and spread it around with the included wooden spatula. Then use one of our TCS cleaning jags to press the patch into the barrel. Use a slight scrubbing motion and feel how well this combination cleans.

When the patch comes out of the barrel, the bore paste will be darker where it made contact with the barrel. You will probably see dirt, copper, and lead on the patch, depending on what was in your barrel. You will know this bore cleaner cleaned your barrel, because "The proof is on the patch." After using the bore paste, visually inspect the barrel and see if you need to reapply. Remember, the Bore Cleaning Paste darkens when used.

Once the barrel looks clean, put some TCS Tactical Cleaning Solvent on a clean patch and use it to remove the bore paste around the outside of the breech area. Then, use another patch with a few drops of TCS Tactical Cleaning Solvent on it to remove the Bore Cleaning Paste residue from the barrel. If you are going to store the gun for any length of time, you can leave the oil in the barrel to protect against corrosion. If you are going to shoot the gun, use a degreaser applied to a patch to remove the oil.

Faster, easier to use, and safer than solvents, this paste is a convenient and effective solution for cleaning your firearm's bore. The included wooden spatula makes it easy to apply the paste, and the TCS cleaning jags ensure a thorough cleaning. The darkening of the paste indicates its effectiveness, and the final step of using the TCS Tactical Cleaning Solvent ensures a clean and well-maintained firearm.

product information: